What LOG saves

LOG saves the reading with the frame you were pointing at, both color estimates, the confidence, the light level, your rig, the lens and the time, plus the place if you allow it. It lands in LIBRARY, newest first.

Step by step

1. Point at the light and wait for the badge.
2. Tap LOG.
3. To add a note, open the reading and type in Notes. It saves when you finish typing.
4. Your last five readings also sit as chips above the controls; tap one to see it.

If that didn't work

Kelvin and tint are saved as measured, with any calibration offset stored beside them, so changing the calibration later never rewrites a reading. Touch and hold LOG for a RAW measurement instead.

Last updated November 2, 2026